Wavecom TnT EL Portable Appliance Tester
Offering an easy to use Portable Appliance Testing system with our fastest microprocessor yet, the TnT EL is the cutting edge in appliance testing technology.
- Estimated Delivery : Up to 4 business days
- Free Shipping & Returns : On all orders over $200
Wavecom TnT EL Portable Appliance Tester
WCM-TnT-EL
- Our latest Portable Appliance Tester
- Class 1, Class 2, Earth Leakage and Extension Lead Tests
- Simple Test Procedures and Easy To Read Results
- 10 Amp Load Current Capacity
- Powered by a Lithium Ion Battery – Conduct over 3,000 sets of tests per charge
Offering one button testing of Class 1 and Class 2 appliances, extension leads, and Earth Leakage tests, plus easy to read results, the TnT EL makes Portable Appliance Testing easy.
The powerful lithium ion battery gives you the flexibility to run tests without needing mains power access. The TnT EL can test up to 3,000 appliances on a single charge.
Plus, with its heavy duty casing and three year warranty, you can be sure the TnT EL will last the distance.
The TnT EL Portable Appliance Tester features:
- Class 1, Class 2, Earth Leakage and Extension Lead Tests to AS/NZS 3760 Standards
- Latest Generation Micro-processor For Faster Testing Times & Greater Testing Efficiency
- Lithium Ion Battery Capable of Powering Up to 3,000 tests per charge (Only TnT EL’s purchased after 01/07/2023).
- Simple Test Procedures & Easy To Read Results
- 10 Amp Load Current Capacity
- Convenient Carry Strap
- Rugged Design + Protective Carry Case
- 3 Year Conditional Warranty
- 12 month Calibration Certificate.
- Australian designed & manufactured
Contents
- Wavecom TnT EL Portable Appliance Tester
- IEC Test Lead (500mm Orange)
- Earth Lead with Alligator Clips (1800mm Black)
- IEC Power Cable
- 12 Month Calibration Certificate
- 36 Month Conditional Warranty
- User Manual & Quick Start Guide
- Wavecom Carry Bag
Dimensions
Packaged: 360mm H x 210mm D * 250mm W – 4kg
Technical Specifications
| AC Input: | 110V-240V 50/60Hz |
| Mains Supply Tests | Checks Polarity and continuity of mains supply by LED indicators (A-N, A-E, and N-E). (Flashing red LED indicates test fail) |
| Class I Tests – Earthed Appliances | Appliance Check: Ensures appliance is plugged in and turned on. Earth Bond Test: 200mA test current. Pass level Less than 1.0 Ω. Measurement: 0.01Ω to 10 Ω. Insulation Test: 500VDC/250VDC. Pass level Greater than 1M Ω. Measurement: 0.1Ω to 10MΩ. *See also: Leakage Test |
| Class II Tests – Double Insulated Appliances | Appliance Check: Ensures appliance is plugged in and turned on. Insulation Test: 500VDC/250VDC. Pass level greater than 1MΩ. Measurement: 0.1Ω to 10MΩ. *See also: Leakage Test |
| Extension Lead Tests | Earth Bond Test: 200mA test current. Pass level Less than 1Ω. Measurement: 0.01Ω to 10.0Ωs. Insulation Test: 500VDC/250VDC. Pass level Greater than 1MΩ. Measurement: 0.1Ω to 10.0MΩ. Continuity/Polarity Test: 250VAC check continuity and polarity of leads. Displays Pass/Fail. |
| Power Measurement | Leakage Current: 0 to 30.0mA at 200 to 265V. Load Current: 0.0 to 10Amp (20Amp for TnP EL 20A) Voltage: 200 to 265VAC – Power Factor: 0.00 to 1.00. Apparent Power: 0 to 2400VA -Power 0 to 2400W. |
| Meter Mode® | Green flashing LED denotes Meter Mode is engaged. Load Current: 0.0 to 10 Amps. Voltage: 200 to 265VAC. Apparent Power: 0 to 2400VA. Power: 0 to 2400W. |
| Leakage Tests | Leakage Current: 0 to 30.0mA at 200 to 265V. Earth Leakage Test: 240VAC Mains. Pass level 1, 2.5, 5.0 mA leakage test levels. Note 1: Pass level for CLASS 1 is 5 mA; pass level for CLASS 2 is 1 mA. Note 2: Leakage test may be performed if a standard CLASS 1 or CLASS 2 is not possible. |
| Battery | 6800 mAH, 7.2V, 48.96WH; Charge Time Approximately 4 Hours. |



